Insert the stick and if using Windows, run the installer that is presented from the modem itself. You will need a laptop or computer with a USB port in order to perform these steps. In addition, the modem itself has a web user interface where you can change the modem's settings. These modems operate in a mode where they use DHCP to give your computer (or your LiveU Solo) a private IP address, different from the public IP address the SIM and the carrier network will give it. However, sometimes you may find you need to debug, change or correct settings in the Wingle, so below is a guide to how to log into the user interface of the modem and do so. The modems included with your Solo Connect kit are pre-configured to work with the SIM included and your LiveU Solo.